Campania

$172.41

per box
Order a minimum of 17 boxes to qualify for free curbside delivery. Details & Promotions
30.3 sq. ft. per box | Sold Per Box Only
$5.69 per sq. ft.
ship-to price
$5.39 per sq. ft.
pick-up price
Consider adding 7-12% for Waste


Campania’s wear layer is constructed from 4-millimeter solid European Oak hardwood and its core is comprised of two to nine-layer plywood. European Oak flooring is one of the most sought after hardwood choices in the US. All of these layers combined to result in a 5/8″(15mm) total plank thickness and each plank measuring to 7-1/2” in width.

Each box of Campania contains 30.3 square feet of engineered hardwood. Wire bristles are used to remove the softer grain within the wood, which accentuates the harder grain and creates a beautifully textured surface with added character. Our flooring is constructed from layers of plywood, topped by a solid European Oak veneer.

PLEASE NOTE: True color may vary based on your monitor settings.

Specifications

Product Design & Construction

CollectionCasa Bellissima
GradeABCD (Character)
ConstructionEngineered Hardwood
ColorNatural
SpeciesWhite Oak
Surface FinishOil
Surface TextureWire Brushed
PatternStraight Plank

Product Dimensions

Plank LengthRandom Up to 73″ (Most pieces are 73″)
Plank Thickness5/8"
Plank Width7-1/2"
Wear Layer4mm
Sq. ft. per box30.30
Price per sq. ft.$5.69
Janka Rating
  • 1360 lbf
  • White Oak

Product Videos

How to clean your oiled flooring with natural soap:

How to treat your oiled flooring with maintenance gel:

How to maintain your flooring using wood cleaner:


  • All of our oil-based floors require cleaning immediately after installation and then use the natural wood flooring soap before normal usage. Next, treat with the appropriate flooring maintenance gel, paste, or oil. You can find Woca™ Natural Soap and Woca™ Maintenance Products available for sale on our Accessories page.
  • After about a year of use, apply Woca™ Maintenance Gel, Paste, or Oil again to add a new protective layer to your flooring. Repeat this process yearly or when the flooring is looking a little dull. Continue to clean with the natural soap on a weekly or biweekly basis.
  • Contact our staff directly if you have questions or need more information.

Oil Maintenance & Accessories

Care and Installation

Care and Maintenance Guide

Installation Instructions

Our Guarantees

25-Year Warranty

Reviews and Questions

Share your thoughts!

Let us know what you think...

What others are saying

  1. Question

    teeme

    Campania floor – does it have clicks? can it be floating installed?

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

    • fernando

      fernando

      Hello Vanessa,

      This floor has a tongue & groove installation method, it doesn’t technically click together but it does snap into place.

      Yes, this floor can be installed with a floating method, please view the instructions below:

      FLOATING METHOD
      When choosing the floating method for engineered wood, it is critical that the subfloor is flat to within 3/16” per 10’ radius. ADM Flooring Inc. will not honor warranty claims for products damaged due to plank movement or flexing due to an uneven floor. For floating installation, a 6mil., age-resistant polyethylene plastic sheet is required as a moisture barrier. Lap up walls 4”. It is also required that a 15lb. asphalt-saturated felt (rag paper) be used as an underlayment above
      the moisture barrier to reduce sound. You can also use a 2 in 1 product that incorporates both a moisture barrier and sound barrier in ONE sheet, e.g. Volara foam ¼” or Floor Muffler products.

      Follow underlayment manufacturer’s instructions. Decide which direction the flooring will run. Install cushioning underlayment running same lengthwise direction that you plan to install the flooring. Starting from left to right across the floor, begin by snapping a chalk line the width of the plank (e.g. 9 ½”) plus the ½” expansion space, off the starting wall. Nail a series of holding boards (i.e. 1” x 4” lengths of wood) along the chalk line, this will help keep the first rows
      straight and firmly in place. Lay the first plank and align with chalk line, up against the holding boards with groove side facing the wall. Take second plank and apply a tongue and groove wood adhesive i.e. ADM’s urethane adhesives (FA-5 and FA-25) made for flooring (follow adhesive manufacturer’s instructions) to the groove on boards end, and join to first plank. Continue same steps until first row is completed. When reaching the end of the first row, cut the last board to fit; use spacing wedges to maintain a ½” expansion space between wall and end of plank. Make sure all end joints are tight and square. Remember to clean adhesive as you work. Begin the second row by cutting board – if necessary – to ensure a staggered end joint of approximately 16”
      between end joints of adjacent planks.

      Thank You
      Fernando ADM Flooring Design

      (0) (0)

      Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Login

Continue as a Guest

[]